4
Setting Up for
Management
C
ONFIGURING AND
S
THE
WITCH
This chapter describes how to configure the CoreBuilder
ATM switch platform. For a description of the LMA login procedure, see
"Starting Up" on page 36.
This chapter provides information about the following topics:
Setting Up for Management
Resetting Configuration Parameters
Managing Switch Modules
ATM Features and Software Versions
EFCI Threshold
Setting Up for PNNI
The following commands allow you to set up the parameters for
managing the CoreBuilder 7000 family ATM switch.
Display Current IP Configuration
Update IP Address
Display Current NMS Configuration
Update NMS Address
Display Current Default Gateway Configuration
Update Default Gateway Address
Display Current Subnet Mask Configuration
Update Subnet Mask Address
Display Current Read Community String Configuration
Update Read Community String Address
Display Current Write Community String Configuration
M
ANAGING
M
ODULES
®
7000 family