3Com CoreBuilder 7000 Management Manual page 122

C 5: C
122
HAPTER ONFIGURING
I M
NTERFACE ODULES
such as an Ethernet ATM device or ATM attached server, the interface
type is UNI. If it is connected to a switch of another vendor, the interface
type is IISP. For more information, see "Network Interfaces" on page 35 in
the Operations Guide.
PNNI is available in version 4.5 extended only.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 3 3
The following information is displayed:
(1) SET: Switch setup
(3) NNI: NNI setup
(3) GIF: NNI get interface type
1 1 3 3
The interface type for each port of the CoreBuilder
7000 family ATM switch is displayed.
Save completed successfully