Set Optimization For All Classes To Default - 3Com CoreBuilder 7000 Management Manual

C 13: C
422
HAPTER ONFIGURING AND
Set Optimization for
All Classes to Default
M PNNI (F
ANAGING
Resets all the optimization parameters to their default values.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
Confirm reset
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 5 2 6 y
The following message is displayed:
PNNI Node 1 of 1.
All optimization metrics were set to their defaults.
Press ENTER to continue...
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
(6) ODF: Set Optimization for
Format or Range
y or n
1 1 10 4 3 5 2 6
All the optimization parameters are reset to their
default values.
All optimization metrics were set to
their defaults.
)
NLY
Metrics
All Classes to Default