Display Tftp Download Status - 3Com CoreBuilder 7000 Management Manual

C 3: G
54
HAPTER ENERAL
Display TFTP
Download Status
T
ASKS
Displays the last TFTP download status. This command applies both to
downloading software and to downloading configuration parameters.
Perform this command after the download process completes.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Download Messages Displayed
Table 11 describes the download system messages displayed by the
command.
Table 11 Download Messages
Message
System is loading from ip
address, file. Received n%
Completed successfully
Unknown
Error while downloading
No response from server
Checksum error
Image is incompatible with the
device
Image file not found
(3) LOA: Load system software
(1) STS: Display TFTP download status
1 3 1
Last TFTP download status is displayed.
Table 11
See .
Meaning and Action
System is loading
Download has completed
No activity, nothing downloaded
CRC error; download again. If the
error persists, contact 3Com
technical support.
Bad connection
check cable connection
check if TFTP server is up
check TFTP server IP address
Download again
The downloaded file properties (e.g.
name) does not match the internal
CoreBuilder list of properties
Check if the file exists in the path