Get Enhanced 164
Address Support
State
Displays the status of the E.164 (enhanced 164) address support state:
ENABLED or DISABLED. See "ATM Address Format" on page 39 in the
Operations Guide for more information on E.164.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 2 1
The following message is displayed:
Enhanced E.164 Address Support is ENABLED.
Configuring PNNI Nodes
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(2) EEA: Enhanced E164 Address
Support
(1) GET: Get Enhanced E.164
Address Support State
1 1 10 4 2 1
The status of the enhanced E.164 address support
state is displayed.
Enhanced E.164 Address Support is
ENABLED/DISABLED.
373