Set Switch Lane Version - 3Com CoreBuilder 7000 Management Manual

Set Switch LANE
Version
Sets the LANE version of the switch. If currently there are LECs joined in
ELANs, they remain joined and the version change affects only new LECs
that join after the change.Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
LANE version
Direct access sequence:
Command Result
System action taken:
System message display:
Example:
Enter: 2 4 2 2
The following message is displayed:
Version has been changed successfully.
Currently joined v2.0 LECs remain as such.
The LANE version of the switch is changed.
LANE Version of Switch
(2) LEM: LAN Emulation
(4) LVR: Lane Version of Switch
(2) SLV: Set switch lane version
Format or Range
1 for v1.0
2 for v2.0
2 4 2
The LANE version of the switch is changed.
Version has been changed successfully.
Currently joined v2.0 LECs remain as
such.
267