Save Vpi/Vci Range - 3Com CoreBuilder 7000 Management Manual

Save VPI/VCI Range

Saves the current UNI (Q93B) VPI/VCI configuration parameters to flash
memory.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 4 3 3
The following message is displayed:
Signaling VCC parameters were successfully saved.
The UNI configuration parameters are saved to flash.
(1) SET: Switch setup
(4) SIG: Signaling setup
(3) VCC: VPI/VCI range setup
(3) SAV: Save sig Q93B config
1 1 4 3 3
The UNI VPI/VCI configuration parameters are saved to
flash memory.
Signaling VCC parameters were
successfully saved.
Signaling Setup 199