Create Cbr Pvc Call - 3Com CoreBuilder 7000 Management Manual

Create CBR PVC Call

Establishes a CBR (Constant Bit Rate) PVC (Permanant Virtual Circuit) Call.
Specify the PCR (Peak Cell Rate) in either 10 Mbps or 1 Kbps units.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Call Type
First Port ID
First VPI
First VCI
PCR Unit
First PCR
Second Port ID
Second VPI
Second VCI
Second PCR
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
P2P 3.1 0 55 1 10 4.2 0 35 20
The following message is displayed:
A new PVC was created with call id: 42
Create Permanent Virtual Channel (PVC)
(4) S&C: Setup and Config Conns
(1) PVC: PVC operations
(8) CRC: Create CBR PVC Call
Format or Range
P2P - Point to Point
P2M - Point to Multipoint
Slot.Port
VPI Value (0-7)
VCI Value (32-511)
0- *10 Kbps
1- *1Mbps
Number of units to be multiplied by the PCR Unit
within the range (1-128)
0 for a P2M call.
Slot.Port
VPI Value (0-7)
VCI Value (32-511)
1-128 Units
3 4 1 8
Creates a CBR PVC Connection
A new PVC was created with call ID (42)
189