Display Virtual Channel To Static Address - 3Com CoreBuilder 7000 Management Manual

C 7: C
176
HAPTER ONFIGURING
Display Virtual
Channel to Static
Address
V C
IRTUAL HANNELS
Displays a specific virtual channel (VPI/VCI) of the port or all virtual
channels (all VPI/VCI) of the port. The virtual channels are created
between static addresses defined by LMA.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
VPI
VCI
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 3 2 3.2 a 0
The following information is displayed:
(3) PRT: ATM ports
(2) STC: Conns of Static addresses
Format or Range
slot.port
(Enter A for all VPI values)
(Enter any value for all VCI values)
3 3 2 [parameters]
The connection information for the specified port is
displayed.
Information is displayed as shown in the example on
page 176.