Display Current Mpc Configuration - 3Com CoreBuilder 7000 Operation Manual

Display Current MPC
Configuration
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
default holding time
Direct access sequence:
Command Result
System action taken:
System message display:
Displays all the current settings of the MPC variables.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 5 2 1
The following information is displayed:
MPOA Devices Configuration
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(1) MPS: MPOA Server Configuration
(8) MP7: Set default holding time
Format or Range
1 - 120 (minutes)
2 5 1 8
The default holding time parameter is set.
Parameter changed successfully
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(2) MPC: MPOA Client Configuration
(1) DIS: Display current config
2 5 2 1
All the current settings of the MPC variables are
displayed.
Information is displayed as shown in the example
below.
177