Configuration File Management Commands; Display Current-Configuration - 3Com 5500G-EI Command Reference Manual

Configuration File
Management
Commands
display
current-configuration
Description
Use the command to recover the deleted file.
undelete
The file name to be recovered cannot be the same as an existing directory name. If
the destination file name is the same as an existing file name, a prompt will be
displayed asking whether to overwrite the existing file.
Example
Display the information for all of the files in the current directory, including the
deleted files.
<SW5500>dir /all
Directory of unit1>flash:/
0 -rw- 595
1 -rw-
16125952 bytes total (13972480 bytes free)
Recover the deleted file
<SW5500>undelete sample.bak
Undelete unit1>flash:/sample.bak ?[confirm]:y
% Undeleted file unit1>flash:/sample.bak
Display the information for all of the files in the current directory, including the
deleted files .
<SW5500>dir /all
Directory of unit1>flash:/
0 -rw-
1 -rw- 595
16125952 bytes total (13972480 bytes free)
This section describes the commands you can use to manage the configuration
files on your Switch 5500G-EI.
Syntax
display current-configuration [ controller | interface
interface-type interface-number
[
] ] [ | { begin | exclude | include }
View
All views
Parameter
View the configuration information of controllers.
controller:
View the configuration information of interfaces.
interface:
Type of the interface.
interface-type
:
Number of the interface.
interface-number
:

Configuration File Management Commands

Jul 12 2001 20:13:19
50 Jul 12 2001 20:09:23
.
sample.bak
50 Jul 12 2001 20:34:19
Jul 12 2001 20:13:19
] | configuration [
test.txt
[sample.bak]
sample.bak
test.txt
configuration
regular-expression
411
]