Configuration File Management Commands; File Attribute Configuration Commands; Display Current-Configuration - 3Com Switch 4500 Family Manual

1

Configuration File Management Commands

The 4500 series Ethernet switches support Expandable Resilient Networking (XRN), and allow you to
access a file on the switch in one of the following ways:
To access a file on the specified unit, you need to enter the file universal resource locator (URL)
starting with unit[No.]>flash:/, where [No.] represents the unit ID of the switch. For example, if the
unit ID of the switch is 1, the URL of the file named text.txt in the root directory of the switch is
unit1>flash:/text.txt.
To access a file on the current unit, you need to enter the file URL starting with flash:/. For example,
the URL of file text.txt in the root directory of the Flash on the current unit is flash:/text.txt.
To access a file on the current directory, enter the path name or file name directly. For example, to
access file text.txt in the current directory, you can directly input the file name text.txt as the file
URL.

File Attribute Configuration Commands

display current-configuration

Syntax
display current-configuration [ configuration [ configuration-type ] | interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Parameters
configuration configuration-type: Specifies to display non-interface configuration. If configuration-type
is not specified, all the non-interface configurations are displayed; if configuration-type is specified, the
specified type of configuration is displayed. The configuration type you can specify is based on your
current configuration. For example:
acl-adv: Indicates the advanced Access Control List (ACL) configuration.
acl-basic: Indicates the basic ACL configuration.
acl-ethernetframe: Indicates the Layer 2 ACL configuration.
acl-user: Indicates the user-defined ACL configuration.
remote-ping: Indicates the remote-ping configuration.
isp: Indicates the internet service provider configuration.
radius-template: Indicates the radius template configuration.
1-1