Debugging Rip; Default-Cost - 3Com 3C13618 Command Reference Manual

2.1.2 debugging rip

Syntax
debugging rip { packet | receive | send }
View
All views
Parameter
packet: Enable the RIP packet-debugging switch.
receive: Enable the RIP packets received debugging switch.
send: Enable the RIP packets sent debugging switch.
Description
Using the debugging rip command, you can enable the RIP packet debugging switch.
Using the undo debugging rip command, you can disable the RIP packet debugging
switch.
The debugging rip command enables you to learn the receiving and sending of RIP
configuration packets at the current interfaces.
Example
None

2.1.3 default-cost

Syntax
default-cost cost
undo default-cost
View
RIP view
Routing Protocol
15