Vrrp Authentication-Mode - 3Com 3C13618 Command Reference Manual

Description
Using the display vrrp command, you can view the status information of all VRRP
backup groups on the router.
Example
# Display all backup group information of the router.
[3Com]display vrrp
Ethernet0 | Virtual Router 1
state : Initialize
Virtual IP : 1.1.1.2
Priority : 80
Preempt : YES
Timer : 1
Auth Type : NO
Track IF : Serial0
The state of the backup group can be Initialize, Master or Backup.

2.1.3 vrrp authentication-mode

Syntax
vrrp authentication-mode simple [ key ]
undo vrrp authentication-mode simple
View
Ethernet interface view
Parameter
simple: Authentication type, perform simple character authentication.
key: Authentication key, a character string with the length of 1 to 8 bytes. Wherein,
the English characters are case insensitive.
Description
Using the vrrp authentication-mode command, you can configure authentication
type and authentication key of VRRP backup group. Using the undo vrrp
authentication-mode command, you can cancel the VRRP authentication.
By default, no authentication is set.
Delay Time : 0
Priority reduced : 20
Reliability
11