Display Encrypt-Card Version - 3Com 3C13618 Command Reference Manual

Description
Using the display encrypt-card syslog command, you can view the current log
conditions of the crypto cards.
If the input slot-id is larger than the slot-number of the router, the system will prompt
"Invalid encrypt-card slot-id".
For related commands, see encrypt-card set syslog
Example
# Display the current log conditions of the crypto card.
[3Com] display encrypt-card syslog 0
Date:2002-02-01,Time: 17:04:04 Encrypt-card 3 : receive time config cmd
Date:2002-02-01,Time: 17:04:04 Encrypt-card 3 : receive add tdb cmd
Date:2002-02-01,Time: 17:04:04 Encrypt-card 3 : receive add tdb cmd

4.1.10 display encrypt-card version

Syntax
display encrypt-card version [ slot-id ]
View
All views.
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the display encrypt-card version command, you can view the current version
of the crypto card.
This command is applicable to crypto cards.
The displayed information includes the version of the firmware and PCB of the crypto
card.
If the input slot-id is larger than the slot-number of the router, the system will prompt
"Invalid encrypt-card slot-id".
Security
51