Apply Default Interface; Chapter 6 Ip Policy Route Configuration; Chapter 6 Ip Policy Route Configuration Commands - 3Com 3C13618 Command Reference Manual

Chapter 6 IP Policy Route Configuration

6.1 IP Policy Route Configuration Commands

6.1.1 apply default interface

Syntax
apply default interface type number
undo apply default interface
View
Routing policy view
Parameter
type: Interface type.
number: Interface number.
Description
Using the apply default interface command, you can
. Using the undo apply default interface command, you can cancel
packets
default output interface of packets.
The apply default interface command is used to set default output interface for
matched IP packets.
This command is used to set default output interface for the matched IP packets.
For related commands, see apply ip precedence, apply ip next-hop, apply
interface, apply ip default next-hop.
Example
[3Com-route-policy] apply default interface serial 0
Commands
Routing Protocol
set default output interface of
the preset
131