Aaa-Enable; Debugging Radius - 3Com 3C13618 Command Reference Manual

3Com Command Reference Guide — V1.00
Example
# Configure the PPP default authentication method list with the following
requirements: use the RADIUS server for authentication first; if no acknowledgement
is received, then change to the local authentication.
[3Com]aaa authentication-scheme ppp default radius local

2.1.5 aaa-enable

Syntax
aaa-enable
undo aaa-enable
View
System view
Parameter
None
Description
Using the aaa-enable command, you can enable AAA. Using the undo aaa-enable
command, you can disable AAA.
By default, disable AAA.
Only when AAA is enabled can other parameters of AAA be configured.
Example
# Enable AAA.
[3Com]aaa-enable

2.1.6 debugging radius

Syntax
debugging radius { event | packet | primitive }
View
All views
12