Display X25 Pad - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

2.6.2 display x25 pad

Syntax
display x25 pad [ pad-number ]
View
All views
Parameter
pad-number: PAD control block number, in the range of 0 to 255.
Description
Using the display x25 pad command, you can view the related information on X.25
PAD.
This command can be used to display information about transmission of X.25 PAD
and X.3 parameter setting etc., so as to maintain X.25 PAD and perform fault
diagnosis and troubleshooting.
For related commands, see pad.
Example
# Display related information on the local X.25 PAD.
[3Com] display x25 pad
connection 1 to host 123456
PAD0:
Total input: 12, control 3, bytes 35, QueuedIn: 1 of 56.
Total output: 10, control 3, bytes 64, QueuedOut: 2 of 56.
State: 3, Last error: 1
ParamsIn: 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0,
8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0,
16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0,
ParamsOut: 1:1, 2:0, 3:2, 4:1, 5:1, 6:0, 7:21,
8:0, 9:1, 10:0, 11:14, 12:1, 13:0, 14:0, 15:0,
16:127, 17:21, 18:18, 19:0, 20:0, 21:0, 22:0,
The above displayed information indicates message transmission information (Total
input/output, QueuedIn/Out, State, Last error) and X.3 parameter setting information
(Paramsln/out). The Paramsln information refers to the X.3 parameter information
received by the local end, and the ParamsOut information refers to the X.3
information issued by the local end.
36