Code Nrzi; Country-Code - 3Com 3C13618 Command Reference Manual

3.1.4 code nrzi

Syntax
code nrzi
undo code
View
Serial interface view
Parameter
None
Description
Using the code nrzi command, you can configure the digital signal encoding format
of synchronous serial interface to NRZI (nonreturn to zero, inverted), Using the undo
code command, you can restore the digital signal encoding format of synchronous
serial interface to NRZ (nonreturn to zero).
By default, the digital signal encoding format of synchronous serial interface is NRZ.
Example
# Configure the digital signal encoding format of interface Serial0 to NRZI.
[3Com-Serial0]code nrzi

3.1.5 country-code

Syntax
country-code area-name
View
Asynchronous serial interface view
AM interface view
Parameter
area-name: Area name, including australia, austria, belgium, brazil, bulgaria, canada,
china, czechoslovakia, denmark, finland, france, germany, greece, hongkong,
hungary, india, ireland, israel, italy, japan, korea, luxembourg, malaysia, mexico,
Interface Management
21