Sdlc Max-Pdu - 3Com 3C13618 Command Reference Manual

View
Synchronous interface view
Parameter
mac-addr: The MAC address of the SDLC peer entity. The address format is
XX-XX-XX-XX-XX-XX.
sdlc-address: the SDLC address of the SDLC peer entity. The value range is 1~FE.
Description
Using the sdlc mac-map remote command, you can configure SDLC peer entity.
Using the undo sdlc mac-map remote command, you can cancel the SDLC peer
entity.
By default, synchronous interface does not specify SDLC address.
The command is to designate a peer MAC address for one SDLC virtual circuit while
the MAC address is to be used as the destination MAC address when transferring
SDLC to LLC2. When setting up DLSw, one SDLC address should be configured with
one corresponding partner. The MAC address of partner shall be the MAC address of
the remote end SNA equipment (physical addresses of such equipment as Ethernet
and Token-Ring) or the next-hop MAC address composed of SDLC.
Example
None

6.1.31 sdlc max-pdu

Syntax
sdlc max-pdu max-frame-size
undo sdlc max-pdu
View
Synchronous interface view
Parameter
max-frame-size: The max length of SDLC receivable frames. The value range is
1~17680 bytes while the default value is 265 bytes.
Network Protocol
119