Reset Bgp - 3Com 3C13618 Command Reference Manual

Parameter
cluster-id: Cluster ID of the reflector, ranging from 1 to 4294967295.
Description
Using the reflect cluster-id command, you can configure the cluster id of the route
reflector. Using the undo reflect cluster-id command, you can cancel the cluster id
of the route reflector.
By default, the ID of the router which acts as a reflector is taken as the cluster ID.
If there is only one route reflector in one cluster, the ID of this router reflector will acts
as the reflector ID of the group.If there is more than one router reflector in a cluster, all
the router reflectors should be configured with the same cluster ID.
For related commands, see reflect between-clients, peer reflect-client.
Example
# 50 is used as group ID to identify this cluster.
[3Com-bgp] reflect cluster-id 50
[3Com-bgp] peer 172.38.160.10 reflect-client

4.1.49 reset bgp

Syntax
reset bgp { all | peer-id }
View
All views
Parameter
all: Resets all current BGP sessions.
peer-id : Resets only the identified BGP peer.
Description
Using the reset bgp command, you can reset BGP connection.
Example
# Clear all BGP connections so as to validate the new configurations.
Routing Protocol
107