Default-Information; Default-Med - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Router A and Router B in the same AS are connected with the external AS via X.25
and Frame Relay protocols. This command can be used to set the default local
preference of Router B to 200 so that the route passing Router B can be selected by
preference when the same route passes Router A and RTB.
[3Com-bgp] default local-preference 200

4.1.10 default-information

Syntax
default-information
undo default-information
View
BGP view
Parameter
None
Description
Using the default-information command, you can originate network 0.0.0.0 into the
BGP. Using the undo default-information command, you can disable this function.
By default, this function is disabled.
The default-information command works together with the import-route command
for importing certain default route identified by the IGP to the BGP.
Example
# Enable to import-route default routes to the BGP routing table.
[3Com-bgp] default-information

4.1.11 default-med

Syntax
default-med med
undo default-med
76