Sdlc Timer Lifetime; Sdlc Timer Poll - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

6.1.40 sdlc timer lifetime

Syntax
sdlc timer lifetime mseconds
undo sdlc timer lifetime
View
Synchronous interface view
Parameter
mseconds: Number of ms that the software waits for an acknowledgment packet from
primary station, ranging from 1 to 60000ms. By default, the acknowledgement wait
time of the SDLC secondary station is 500ms.
Description
Using the sdlc timer lifetime command, you can configure the time to wait for a
reply used by secondary station. Using the undo sdlc timer lifetime command, you
can restore the time to wait for a reply used by secondary station to the default value.
After sending messages to the secondary station, SDLC secondary station will wait
for responses from the primary station and timer will be started.
Example
None

6.1.41 sdlc timer poll

Syntax
sdlc timer poll mseconds
undo sdlc timer poll
View
Synchronous interface view
Parameter
mseconds: The SDLC polling time interval. The value range is 1~10000ms while the
default value is 100ms.
126