Display Pos-Interface - 3Com 3C13618 Command Reference Manual

This command can be used to display the following information related to the POS
application: number of application, connection state, and the number of received
packets, error packets, packets with distribution error, discarded packets, sent packets
and the packets in the buffer. The packets with distribution error are those packets
that could not find the POS access port. The discarded packets are the packets that
should be sent to the FEP by the application but are discarded because the link has
failed, or the buffer is full, or the application has not been set. The packets in the
buffer are the packets existing in the buffer to be sent to the application.
Example
# Display the brief information about POS application.
[3Com] display pos-app
AppId State
0 up
1 up

5.1.7 display pos-interface

Syntax
display pos-interface
View
All views
Parameter
None
Description
Using the display pos-interface command, you can view the brief information on the
POS interface.
This command is used to display some major information on the POS interface,
including ID, interface name, connection state, and the number of packets received,
error packets, packets with application mapping error, packets discarded and packets
in the buffer. The interface name refers to that of the POS access port. The
connection state refers to the physical state of the POS access port. The error
packets refer to packets that could not be identified as packet data having complete
exchange, such as checksum error packets and incomplete packets, etc. The packets
with application mapping error are those packets for which the corresponding
relations of application cannot be found. The packets discarded are packets that
Recv PacErr DisErr Discarded Buffed
100 2 2
60 0 0
2 3
0 0
System Management
87