Display Bridge Information - 3Com 3C13618 Command Reference Manual

Description
Using the display bridge bridge-template command, you can view the configuration
of bridging or routing function switch state for special protocol.
If you are unaware of the bridging or routing function switch state for special protocol
configuration of a bridge set, use the display bridge bridge-template command to get
the information.
Example
# Display the bridging or routing function switch state for special protocol configuration
of the bridge set 1.
[3Com]display bridge 1 bridge-template
Bridge set 1:
Bridge-template interface:
Virtual MAC address:
No IP routed, IP bridged,
Table 8-1 Field description of the display bridge bridge-template command
Field
Virtual MAC address
No IP routed
IP bridged
IPX bridged
No IPX routed

8.1.28 display bridge information

Syntax
display bridge information
View
All views
Parameter
None
Description
Using the display bridge information command, you can view the information in the
bridge MAC address table.
00-e0-fc-00-00-01
IPX routed, No IPX bridged , Defalt bridged
MAC address of the Bridge-template interface to which the bridge set corresponds.
IP packets cannot be routed in the bridge set.
IP packets can be bridged in the bridge set.
IPX packets can be bridged in the bridge set.
IPX packets cannot be routed in the bridge set.
Link Layer Protocol
Description
161