# Display the current log information saved in the buffer in the router.
[3Com] display info-center logbuffer
%01:19:38-PPP-6-DEBUG: Serial2:0
PPP O LCP(c021) Pkt, Len 18
State starting, code ConfReq(01), id 21, len 14
MRU(1), len 4, val 05dc
MagicNumber(5), len 6, val 322a0100
% Interface Serial2:0 changed state to UP
%01:19:40-PPP-6-DEBUG: Serial2:0
PPP I LCP(c021) Pkt, Len 18
State reqsent, code ConfReq(01), id 6, len 14
MRU(1), len 4, val 05dc
MagicNumber(5), len 6, val 0000d32d
%01:19:41-PPP-6-DEBUG: Serial2:0
PPP O LCP(c021) Pkt, Len 18
State reqsent, code ConfAck(02), id 6, len 14
MRU(1), len 4, val 05dc
MagicNumber(5), len 6, val 0000d32d
% Line protocol ip on interface Serial2:0, changed state to UP
%01:19:41-PPP-6-DEBUG: Serial2:0
PPP O LCP(c021) Pkt, Len 18
State acksent, code ConfReq(01), id 22, len 14
MRU(1), len 4, val 05dc
MagicNumber(5), len 6, val 85670100
4.3.2 info-center console
Syntax
info-center console [ English | Chinese ] [ emergencies | alerts | critical | errors |
warnings | notifications | informational | debugging ] [ filter [ facility1 facility2 ...] ]
undo info-center console [ English | Chinese ] [ emergencies | alerts | critical |
errors | warnings | notifications | informational | debugging ] [ filter [ facility1
facility2 ... ] ]
View
System view
Parameter
The parameters and options are described as follows:
System Management
75
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?
Questions and answers