Tunnel Password - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Set the local tunnel name of L2TP group 1 to itsme.
[3Com-l2tp1] tunnel name itsme

1.1.18 tunnel password

Syntax
tunnel password { simple | cipher } password
undo tunnel password
View
L2TP group view
Parameter
simple: Password shown in plain text;
cipher: Password shown in cipher text.
password: Password used during the tunnel authentication, which is a character string
of 1 to 16 characters.
Description
Using the tunnel password command, you can configure the password used during
tunnel authentication. Using the undo tunnel password command, you can cancel
the password of the tunnel authentication.
By default, the password of tunnel authentication is the router name.
This command can be used on both LAC and LNS, and is an optional configuration.
When creating a L2TP group, the local tunnel name and the tunnel password are both
initialized to be the router's name.
For related commands, see tunnel authentication, tunnel name.
Example
# Set the tunnel password on L2TP group 1 to "yougotit" and make it shown in the
form of cipher text.
[3Com-l2tp1] tunnel password cipher yougotit
18