Bridge Learning; Bridge Link-Set Origin - 3Com 3C13618 Command Reference Manual

Example
# Disable the bridging function.
[3Com]undo bridge enable

8.1.4 bridge learning

Syntax
bridge bridge-set learning
undo bridge bridge-set learning
View
System view
Parameter
bridge-set: Bridge set number in the range of 1 to 63.
Description
Using the bridge learning command, you can enable forwarding by using dynamic
address table. Using the undo bridge learning command, you can disable using the
dynamic address table to forward, i.e., merely using the static port table to forward.
By default, forwarding is enabled by using dynamic address table.
The dynamic address table does not require manual maintenance. It can automatically
refresh whenever the network topology takes changes.
Example
# Enable the interface Ethernet 0 to use the dynamic address table to forward.
[3Com]bridge 1 learning

8.1.5 bridge link-set origin

Syntax
bridge bridge-set link-set link-set origin
undo bridge bridge-set link-set link-set origin
View
System view
Parameter
bridge-set: Bridge set number in the range of 1 to 63.
link-set: Link set number in the range of 1 to 9.
Link Layer Protocol
145