Crc; Display Controller T3 - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
[3Com]controller t3 0
[3Com-T3-0]

3.7.4 crc

Syntax
crc { 16 | 32 | none }
undo crc
View
Serial interface view
Parameter
16: Use 16-bit CRC.
32: Use 32-bit CRC.
none: Do not use CRC.
Description
Using the crc command, you can configure CRC mode of the serial interface formed
by CT3. Using the undo crc command, you can restore the default configuration.
By default, 16-bit CRC is used.
For the related commands, see t1 channel-set, t1 unframed and using.
Example
# Use 32-bit CRC on the serial interface formed by interface T3 0 in
non-channelization mode.
[3Com-Serial0/0:0]crc 32

3.7.5 display controller t3

Syntax
display controller t3 interface-number
View
All views
72