Using (Ce3 Interface) - 3Com 3C13618 Command Reference Manual

3.6.12 using (CE3 Interface)

Syntax
using { e3 | ce3 }
undo using
View
CE3 interface view
Parameter
e3: E3 operation mode.
ce3: CE3 operation mode
Description
Using the using command, you can configure the operation mode of CE3 interface.
Using the undo using command, you can restore the default operation mode.
By default, operation mode of CE3 interface is CE3 mode.
The user can configure E1 channels only when the CE3 interface is working in CE3
mode.
When CE3 interface works in E3 mode, the system will automatically create a serial
interface whose number is serial number/0:0 and whose rate is 34.368 Mbps. The
interface has the same logic feature as that of a synchronous serial interface,
therefore, it can be regarded as a synchronous serial interface for further
configuration.
For related commands, see controller e3.
Example
# Configure E3 0 interface to work in E3 mode.
[3Com-E3-0]using e3
Interface Management
69