Log Commands; Display Info-Center - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
From the above results you can learn the gateways through which the data packets
go from the source host to the destination host (1~17), and the gateways to which the
faults occur (12, 14, 15, 16, 17).

4.3 Log Commands

4.3.1 display info-center

Syntax
display info-center [ logbuffer ]
View
All views
Parameter
None
Description
Using the display info-center command, you can view the configuration information
for the log system or record the information in the buffer of the router.
display info-center logbuffer is used to display the log information saved in the
buffer of the router.
For related commands, see display current-configuration.
Example
# Display the current log configuration.
[3Com] display info-center
[Buffer logging]
size 200,level informational,language English,filter off,51668 messages logged
.
[Console logging]
disabled
[Host logging]
disabled
[Monitor logging]
disabled
[Syslog logging]
enable(51685 messages logged,1932 messages dropped).
74