Parameter
None
Description
Using the debugging multicast kernel-routing command, you can enable the
debugging information switch of multicast kernel route table. Using the undo
debugging multicast kernel-routing command, you can disable the debugging
information switch of multicast kernel route table.
By default, the system turns off the debugging information switch of multicast
kernel route table.
Example
None
2.1.5 debugging pim common
Syntax
debugging pim common { all | events | packets | timer }
View
All views
Parameter
all: Enable the all the debugging information output of PIM.
events: Enable the all the event debugging information output of PIM.
packets: Enable the all the packet debugging information output of PIM.
timer: Enable the timer debugging information output of PIM.
Description
Using the debugging pim common command, you can enable general
debugging information switch of PIM. Using the undo debugging pim common
command, you can disable general debugging information switch of PIM.
By default, the system turns off general debugging information switch of PIM.
Example
None
2.1.6 debugging pim dm
Syntax
debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all |
assert | graft | graft-ack | join | prune } }
Multicast Protocol
13