Bridge-Set Stp Disable; Bridge-Set Stp Port Pathcost - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

8.1.22 bridge-set stp disable

Syntax
bridge-set bridge-set stp disable
undo bridge-set bridge-set stp disable
View
Interface view
Parameter
bridge-set: Bridge set number, in the range of 1 to 63.
Description
Using the bridge-set stp disable command, you can disable STP on a port. Using the
undo bridge-set stp disable command, you can enable STP on the port.
By default, STP is enabled on ports.
Only when the interface STP is enabled can all the configured parameters related to the
STP take effect.
Example
# Disable STP on Ethernet0.
[3Com-Ethernet0]bridge-set 1 stp disable

8.1.23 bridge-set stp port pathcost

Syntax
bridge-set bridge-set stp port pathcost cost
undo bridge-set bridge-set stp port pathcost
View
Interface view
Parameter
bridge-set: Bridge set number, in the range of 1 to 63.
cost: Path cost of a bridge port, in the range of 1 to 65535. By default, the path cost of
Ethernet port is 100 and the path cost of serial interface is 647.
Description
Using the bridge-set stp port pathcost command, you can configure a path cost for a
bridge port. Using the undo bridge-set stp port pathcost command, you can restore
the default path cost of the bridge port.
158