Peer Group - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Description
Using the peer filter-policy command, you can configure the filter policy for the peer
or peer group.
By default, no filter policy is specified for any peer or peer group.
For related commands, see ip as-path, peer acl.
Example
# Set the filter policy for receiving packet of the peer group "test".
[3Com-bgp] peer test as-number 100
[3Com-bgp] peer test filter-policy 3 import

4.1.40 peer group

Syntax
peer group-name group
undo peer group-name group
peer peer-address group group-name
undo peer peer-address group group-name
View
BGP view
Parameter
group-name: Group name.
peer-address: Peer's IP address.
Description
Using the peer group command, you can configure a peer group. Using the undo
peer group command, you can cancel the peer group.
Using the peer group command, you can add the peer to the peer group. Using the
undo peer group command, you can cancel a specified peer in a peer group.
The BGP peer group is used to facilitate the user in making configurations. When a
user activates a number of neighbors with the same configuration, he can first create
a peer group and then configure it. Then he can add the other neighbors to this peer
group so as to obtain the same configuration with that of this peer group.
100