Reset Encrypt-Card Sa Parameters - 3Com 3C13618 Command Reference Manual

3Com Command Reference Guide — V1.00
If you just want to output the needed information in the debugging process, use the
reset encrypt-card sa all command to cancel the database information of SA on the
crypto card.
For related commands, see ipsec card-proposal, reset encrypt-card sa
parameters, display encrypt-card ipsec sa all.
Example
# Cancel SA on the crypto card of Slot 0.
[3Com] reset encrypt-card sa all 0

4.1.33 reset encrypt-card sa parameters

Syntax
reset encrypt-card sa parameters peer ah | esp spi-number
View
All views
Parameter
peer: Destination IP address.
spi-number: Security parameter index.
Description
Using the reset encrypt-card sa parameters command, you can cancel the
specified security associations of all crypto cards.
This command is applicable to crypto card.
If you just want to output the needed information in the debugging process, use the
reset encrypt-card sa parameters command to cancel the database information of
the backup host SA on the crypto card.
For related commands, see ipsec card-proposal, reset encrypt-card sa all.
Example
# Cancel the SA who uses destination address 10.10.10.1, ESP security protocol and
SPI 12345.
[3Com] reset encrypt-card sa parameters 10.10.10.1 esp 12345
76