3Com Command Reference Guide — V1.00
View
System view
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the encrypt-card set time command, you can synchronize the time of the
operating system on the crypto card.
This command is applicable to crypto cards.
This command is usually used when a crypto card is added. During normal operation,
the crypto card synchronizes the system clock with the host periodically.
Example
# Synchronize the working time of the operating system on the crypto card of Slot 0.
[3Com] encrypt-card set time 0
4.1.23 esp-new authentication-algorithm
Syntax
esp-new authentication-algorithm { md5-hmac-96 | sha1-hmac-96 }
undo esp-new authentication-algorithm
View
IPSec proposal view & proposal view of crypto card
Parameter
md5-hmac-96: Device adopts MD5 authentication algorithm, which is the
internationally-recognized authentication algorithm.
sha1-hmac-96: Device adopts SHA-1 authentication algorithm, .which is the
internationally-recognized authentication algorithm.
64
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?