Configuring the IP queue length may affect the running efficiency at the Ethernet
interface. Therefore you should configure it under the guidance of the technical
support engineer.
Example
# Configure the IP queue length to be 70.
[Quidway] ifquelen ip 70
3.1.6 ifquelen ipx
Syntax
ifquelen ipx queue-length
View
System view
Parameter
queue-length: ranging from 10 to 1000 bytes. The default queue length is 75 bytes.
Description
Using the ifquelen ipx command, you can configure the queue length of the IPX
packets at the interface.
Example
# Configure the IPX queue to 95.
[Quidway] ifquelen ipx 95
3.1.7 ip option source-route
Syntax
ip option source-route
undo ip option source-route
View
System view
Network Protocol
53
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?
Questions and answers