3Com 3C13618 Command Reference Manual page 816

3Com Router Command Reference Guide — V1.00
View
Interface view
Parameter
max-queue-length: The maximum number of packets in each queue, ranging from 1
to 1,024. When the number of packets in a certain queue exceeds this limit, the
exceeding ones will be discarded.
total-queue-number: Total number of queues, which can be 16, 32, 64, 128, 256, 512,
1024, 2048, and 4069.
Description
Using the qos wfq command, you can configure WFQ (Weighted Fair Queuing).
Using the undo qos wfq command, you can restore the default congestion
management policy.
By default, the congestion management policy is FIFO.
The default max-queue-length is 64 packets.
The default total-queue-number is 256 dynamic queues.
With a non-WFQ interface, WFQ policy can be adopted on interface by using this
command. Meanwhile, WFQ parameters can be specified at the same time when
WFQ policy being adopted. With WFQ policy adopted on interface, you can use this
command to modify WFQ parameters.
For related commands, see display qos wfq.
Example
None
26