Chapter 3 Network Management Configuration Commands; Snmp Configuration Commands; Debugging Snmp-Agent - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Chapter 3 Network Management Configuration

3.1 SNMP Configuration Commands

3.1.1 debugging snmp-agent

Syntax
debugging snmp-agent { headers | packets | process | trap | all }
undo debugging snmp-agent { headers | packets | process | trap | all }
View
All views
Parameter
headers: Display the headers of received SNMP (Simple Network Management
Protocol) messages
packets: Contents of SNMP messages received/sent.
process: Display debugging information in agent operations.
trap: Display information on the agent when it sends traps.
all: Display all SNMP information.
Description
Using the debugging snmp-agent command, you can enable the debugging of
transceived SNMP messages and their processing process on the agent. Using the
undo debugging snmp command, you can disable the debugging.
Example
None
40
Commands