Default Import-Route Type; Display Ospf - 3Com 3C13618 Command Reference Manual

3.1.7 default import-route type

Syntax
default import-route type { 1 | 2 }
undo default import-route type
View
OSPF view
Parameter
1: stands for Type 1 external route.
2: stands for Type 2 external route
Description
Using the default import-route type command, you can configure default type for
importing external routes. Using the undo default import-route type command, you
can restore the default type.
Default type for importing external routes is type 2.
OSPF specifies two cost selection methods for two types of external routing
information. You can select the default cost type via the commands described in this
section.
For related commands, see default import-route cost, default import-route tag.
Example
# Specify the default external route to be type 1 when OSPF redistributes external
routes.
[3Com-ospf] default import-route type 1

3.1.8 display ospf

Syntax
display ospf
View
All views
Routing Protocol
39