Display Ip Routing-Table Verbose - 3Com 3C13618 Command Reference Manual

Parameter
None
Description
Using the display ip routing-table static command, you can view the static routing
table.
Depending on the output of this command, users can make sure whether the
configuration of the static route is correct.
For related commands, see ip route-static, display ip routing-table, display ip
routing-table ip-address, display ip routing-table verbose.
Example
# Display the static routing table.
[3Com] display ip routing-table static
Static routes for family INET: (* indicates gateway(s) in use)
1.2.3.0/24 pref 60 <Int> intf Ethernet 0
127.0.0.8 pref 0 <NoAdv Int Retain Rej> intf
127.0.0.1
This command's output helps users to make sure whether the configuration of the
static route is correct. The information above shows destination ip address/length of
mask, priority of the route, <State Parameter>, and the address of the output interface
or next hop.

1.1.4 display ip routing-table verbose

Syntax
display ip routing-table verbose
View
All views
Parameter
None
Description
Using the display ip routing-table verbose command, you can view the details of a
routing table.
Routing Protocol
9