Display Igmp Interface - 3Com 3C13618 Command Reference Manual

Description
Using the display igmp group command, you can view the conditions of group
members known through IGMP packet in the direct connected subnet.
Output the existing conditions of group membership.
For related commands, see igmp timer query.
Example
[3Com] display igmp group
Ethernet0 (169.254.21.21): Total 1 IGMP Group reported:
Group Address
224.1.1.1
LoopBack2 (5.5.4.4): No multicast-group joined
Table 1-1 Meaning of Information Parameters Displayed with the Command "display igmp group"
Group address
Uptime
Expires
Last Reporter

1.1.3 display igmp interface

Syntax
display igmp interface [ type number ]
View
All views
Parameter
type: Interface type
number: Interface number
Description
Using the display igmp interface command, you can view the configuration
information of IGMP interface.
For related commands, see igmp group-policy, igmp timer query.
Example
[3Com] display igmp interface
Ethernet0 (10.110.51.39):
IGMP is enabled on interface
Uptime
00:00:03
Domain
Multicast group address
Time since the multicast group was found (H, M. S)
Record the predefined time to be deleted from IGMP group table. (H, M, S)
The last host which is reports as the multicast group membership.
Expires Last Reporter
00:02:57 169.254.21.21
Description
Multicast Protocol
3