Chapter 1 Igmp Configuration Commands - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

Chapter 1 IGMP Configuration Commands

1.1 IGMP Configuration Commands
1.1.1 debugging igmp
Syntax
debugging igmp { all | event | host | packet | timer }
View
All views
Parameter
all : Enable all IGMP debugging functions
event: Enable IGMP events debugging functions
host: Enable IGMP host debugging functions
packet: Enable IGMP packet debugging functions
timer: Enable IGMP timer debugging functions
Description
Using the debugging pim dm command, you can enable IGMP debug packet
switch. Using the undo debugging pim dm command, you can disable IGMP
debug packet switch.
By default, the system turns off IGMP debug packet switch
Example
None
1.1.2 display igmp group
Syntax
display igmp group [ group-address | interface type number ]
View
All views
Parameter
group-address: Multicast group address.
type: Interface type.
number:Interface number.
2