Interface - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
View
System view
Parameter
minutes: Time interval for counting of traffic at all interfaces, in minutes. Ranging from
1 to 10 minutes. By default, minutes is 5 minutes.
Description
Using the flow-interval command, you can configure the time interval for counting
traffic at all interfaces.
The system keeps statistics on traffic at every time interval to calculate traffic per time
unit for the sake of reference. This parameter minutes has effects on other flow
control methods including the dialer threshold command. This command is used to
set the time interval for counting traffic at all interfaces.
For related commands, see display interfaces, reset counters interface.
Example
# Set the time interval for counting traffic at all interfaces to 2 minutes.
[3Com]flow-interval 2

1.1.5 interface

Syntax
interface type number [ .sub-number ]
undo interface type number [ .sub-number ]
View
All views
Parameter
type: Type of interface. The interface types supported by the operating system at
present are shown in Table 1-2.
number: Number of the interface. The operating system numbers all the interface
types of the router. The number of the interface for each interface type starts from 0
or 1.
sub-number: Sub interface number. Range from 0 to 4294967295.
8