Snmp-Agent Group - 3Com 3C13618 Command Reference Manual

Description
Using the snmp-agent community command, you can configure SNMP community
name and its access authority. Using the undo snmp-agent community command,
you can cancel SNMP community names which are already set.
By default, no community name is set.
Community name is only useful when either SNMPv1 or SNMPv2c is used. If neither
of the versions is used, you need to configure at least a community name or a
SNMPv1 (or SNMPv2c) user.
For related commands, see
snmp-agent mib-view, display snmp-agent community.
Example
# Set the community name to "public", which can be used for accessing those objects
with read-only authority.
[3Com] snmp-agent community private read
# Set the community name to "private", which can be used to access those objects
with read-write authority, and it also specifies the accessible MIB view to view1 and
access list to 2.
[3Com] snmp-agent community public view view1 write acl 2
# Delete the read-only community name "private".
[3Com] undo snmp-agent community private

3.1.12 snmp-agent group

Syntax
snmp-agent group { v1 groupname | v2c groupname | v3 groupname
{ authentication | noauthentication | privacy } } groupname [ read-view readview ]
[ write view writeview ] [ notify view notifyview ] [ acl acl ]
undo snmp-agent group { v1 groupname | v2c groupname | v3 groupname
{ authentication | noauthentication | privacy } }
View
System view
Parameter
v1: Use version SNMPv1.
snmp-agent, snmp-agent
System Management
sys-info version.
49