Gateway-List - 3Com 3C13618 Command Reference Manual

The DHCP server can specify different valid periods for leasing addresses for
different address pool. All addresses in the same DHCP address pool have the same
valid period.
The valid period for address leasing is not inheritable.
For related commands, see dhcp server ip-pool.
Example
# Set the valid period of leasing the IP address in the address pool 0 to 1 day, 2
hours, 3 minutes.
[Quidway-dhcp0] expired 1 2 3

2.4.14 gateway-list

Syntax
gateway-list ipaddress1 [ ip-address2 ... ip-address8 ]
undo gateway-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-addressX: The IP address of the outgoing gateway router, X=1,2, ...8.
all: All ip-addresses
Description
Using the gateway-list command, you can configure the IP address of the outgoing
gateway router on the DHCP client. Using the undo gateway-list command, you can
cancel the outgoing gateway router configuration allocated to the DHCP client.
By default, no outgoing gateway router is configured.
When a DHCP client accesses an IP address beyond this subnet, all the data must
be sent and received through the gateways of that network.
At present, each DHCP address pool can be configured with up to 8 outgoing
gateway routers.
If you want to specify several outgoing gateway addresses, you need to use the
gateway-list command to configure more than one address continuously instead of
Network Protocol
29