Pos-Server Enable; Pos-Server Fcm - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

5.1.10 pos-server enable

Syntax
pos-server enable
undo pos-server enable
View
System view
Parameter
None
Description
Using the pos-server enable command, you can enable the POS access server.
Using the undo pos-server enable command, you can disable the function.
By default, POS access server is disabled.
To implement the POS access, it is necessary to start the POS access server first.
After starting the POS server, execute the pos-server enable command, the system
will then prompt as follows.
pos-server has been enabled.
Example
# Enable the POS access function.
[3Com] pos-server enable

5.1.11 pos-server fcm

Syntax
pos-server fcm { [answertime time ] [tradetime time ] [ packetinterval time ] }
undo pos-server fcm [answertime time ] [ tradetime time ] [ packetinterval time ]
View
System view
90