undo ftp-server enable
View
System view
Parameter
None
Description
Using the ftp-server enable command, you can enable the FTP server. Using the
undo ftp-server enable command, you can disable the FTP server.
By default, Ftp server is disabled.
This command can be used to enable or disable the FTP server to safeguard the
router.
Example
# Disable the FTP server.
[3Com] undo ftp-server enable
1.2.4 ftp-server system-name
Syntax
ftp-server system-name file-name
View
System view
Parameter
file-name: System program filename.
Description
Using the ftp-server system-name command, you can configure the name of the
system program file.
By default, the name of the system program file is system.
System Management
15
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?