Ftp-Server Update; Kill Ftp - 3Com 3C13618 Command Reference Manual

1.2.6 ftp-server update

Syntax
ftp-server update { fast | normal }
View
System view
Parameter
fast: Fast update mode.
normal: Normal update mode.
Description
Using the ftp-server update command, you can set the FTP update mode.
By default, FTP Server adopts fast update mode.
When logging onto the FTP Server from a PC, you can use the put command to
upload the file. FTP Server adopts two update modes: fast update mode and normal
update mode.
Fast update mode: In this mode, after the FTP Server has received the files
uploaded by the user, it will write the files into Flash memory. Even when the
power is disconnected during transmission of the files, the existing files in the
router are not destroyed.
Normal update mode: In this mode, the FTP Server writes the files uploaded by
the user into Flash memory as it receives the files. The existing files in the router
can be destroyed due to power disconnection. Compared with the fast update
mode, the system demands less empty memory in the router when working in
the normal update mode.
Example
# Set FTP Server to be updated in the normal update mode.
[3Com] ftp-server update normal

1.2.7 kill ftp

Syntax
kill ftp
System Management
17