Reflect Between-Clients; Reflect Cluster-Id - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

4.1.47 reflect between-clients

Syntax
reflect between-clients
undo reflect between-clients
View
BGP view
Parameter
None
Description
Using the reflect between-clients command, you can enable route reflection function
between the clients within the reflection group. Using the undo reflect
between-clients command, you can disable route reflection function between the
clients within the reflection group.
By default, route reflection function is enabled.
This command must be configured to the router used as the route reflector.
For related commands, see reflect cluster-id, peer reflect-client.
Example
# Disable reflection between clients.
[3Com-bgp] undo reflect between-clients

4.1.48 reflect cluster-id

Syntax
reflect cluster-id cluster-id
undo reflect cluster-id
View
BGP view
106